|
The Choice Seems Obvious!!!!
Where the product is used:
UL Listings:
-
Black Products – UL486A & UL486B
(Not for use with Fine Stranded Wire)
-
Direct Burial/Submersible –
UL486A, UL486B, UL486D
-
Grey, Fine Stranded Products –
UL486A (Copper conductor Only)
-
Uninsulated Products – UL486A
and UL486B
Benefits:
-
Pre-Insulated (No cover or
Taping Required)
-
Abrasion and Chemical Resistant
-
UV Rated Insulation with high
dielectric strength
-
UL Listed
-
Will not support Combustion
-
Dual Rated for use with Copper
and Aluminum cables
-
ISRW connectors for
Submersible/Direct Burial Applications
-
Grey Connectors UL Listed for
fine stranded wire applications (Copper conductor Only)
Don’t Settle for Less... The
original is still the finest!!!
No
one else even comes close.
We stock over 300 different
sizes and types of connectors, so we have the right connector to do
most jobs- right off the shelf. However, if your power distribution
application calls out for a custom solution, then we can deliver
that custom product in 3 days or less.
Our ten distinct product groups
includes the only UL listed insulated connector with isolated
mounting capability, which allows for direct mounting to the trough,
panel, or wireway; and our Insul-Tap™ connector is rapidly replacing
split bolts as the connector of choice in most applications.
Our new Polaris Blue™ insulated
connectors are UL listed for direct burial/submersible connections
and requires almost no field modifications. With Polaris™
connectors, you just strip the cable, insert it into the connector,
tighten the screw, replace the cap, and you’re done. An absolutely
incredible family of products, all backed by extraordinary service.
Polaris connectors are preinsulated
with a specially formulated plastisol compound, which eliminates
costly in-field taping and can save up to 60% on total installed
cost. The insulation is abrasion and chemical resistant and will
not support combustion. All connectors are pre-filled with an oxide
inhibitor for use with either copper or aluminum and are UL listed
for use at 90 degrees C and 600 Volts. They are also UV rated and
Cold Temperature rated to –45degrees C.
Due to the compact design and the
consistent quality of a factory-applied finish, you get a safe
professional job every time. Polaris connectors are completely
reusable and are especially ideal when space and time are limited.
These features, together with the wide conductor range, allow for
tremendous flexibility in the field
|
